1/2 Arbre de Sam 1300

[frneko]

Merci à tous,
j'ai pu me ébrouiller avec un joint homocinétique neuf "made in Japan"
vznsu chez AD Distribution, pour 140 euros.
Chez Maesson, il a eu un problème avec son fournisseur et il faut attendre 6 à 8 semaines... pour du réassortiment Samurai.
L'adresse en Espagne à 400 roros les deux, c'est où ?
Merci à tous.

[Super Jimny]

These HD front axle shafts have 22 splines and fit in the original front differential.
They are our own home made axle shaft and tested during several years in the competition.
It is available for the samurai wide axle version and also for the sj413/sj410/Jimny.
The S0102016 is the 22splines halfshaft.
The S0102017 is the 22splines + heavy duty CV joint.




Ils les ont en stock

[Super Jimny]

Calmini 26 spline front HD halfshafts






Brand new replacement CALMINI Heavy Duty forged front axle shafts for the Suzuki Samurai.
Finally an easy solution to running larger off-road tires and beefing up the normally weak stock front axle setup.
Axles are 30% stronger than factory and made from 4140 alloy steel.
These heavy duty axles are 26 splined and require the rear carrier to install in the front differential.
These axles greatly reduce the chance or breaking or shearing in off-road situations and work extremely well with CALMINI Birfield Cups to make the front axle bulletproof.
Now you can run a locker with new side gears in the front and not worry about snapping axle shafts!

C'est aussi en stock