Indicateur pression
Modérateurs : christian.styling, eric def 90 300 dti
- ejeepsien
- Quatre-Quatreux
- Messages : 6260
- Date d’inscription : mai 2010
- Localisation : SeinoMarin
- Statut : Hors ligne
re: Indicateur pression
- Si le capteur de ta roue de secours a été initialement programmé à une pression, disons > 3 (car c'est assez fréquent que l'on surgonfle la RS)
- Et si ensuite tu as roulé avec cette RS à la pression de roulage recommandée qui est <3 , disons par exemple 2,3
- Il est possible que tu retrouves maintenant avec la RS remise en place que le système interprète comme sous-gonflée ?
C'est une simple hypothèse
- Jeep22
- Adhérent
- Messages : 5149
- Date d’inscription : avril 2013
- Localisation : En Mer
- Statut : Hors ligne
re: Indicateur pression
Grand Cherokee WK 2 FAP et Willys 1944
- eric def 90 300 dti
- Modérateur
- Messages : 15893
- Date d’inscription : août 2002
- Localisation : palaiseau (91)
- Statut : Hors ligne
re: Indicateur pression
le problème est simple
il faut réinitialiser les valves et leurs places
soit avec un diag info ou avec un pocket valve
dommage que tu sois trop loin pour moi
j'ai le matos dans la voiture en permanence
MAis il faut revoir ton garage de marque
Climatisation et géométrie (30 ans)
Ex-instructeur 4X4 et circuit asphalte (22 ans)
Mon Ex 4x4: Def 110 TD5 SW 2003 à 2016
2016 >>Toyota Hilux Dc 2.5 ..2013
- Jeep22
- Adhérent
- Messages : 5149
- Date d’inscription : avril 2013
- Localisation : En Mer
- Statut : Hors ligne
re: Indicateur pression
Je vais retourner au garage
Je vais parfois dans ton secteur...
Grand Cherokee WK 2 FAP et Willys 1944
- Jeep22
- Adhérent
- Messages : 5149
- Date d’inscription : avril 2013
- Localisation : En Mer
- Statut : Hors ligne
re: Indicateur pression
Grand Cherokee WK 2 FAP et Willys 1944
- Rem's
- Quatre-Quatreux
- Messages : 5117
- Date d’inscription : juillet 2012
- Localisation : Lyon
- Statut : Hors ligne
re: Indicateur pression
http://www.wkjeeps.com/wk_tpms.htm a écrit :
Spare tire sensor programming
On vehicles equipped with a Tire Pressure Monitoring System (TPMS), when the spare tire pressure sensor is replaced with a new pressure sensor, a diagnostic scan tool MUST be used to run a routine that will program the new pressure sensor ID into the Wireless Control Module (WCM), commonly referred to as the Sentry Key Remote Entry Module (SKREEM). Please copy the ID number off of the new pressure sensor before installing it into the spare tire. Then follow the programming steps outlined in the diagnostic scan tool for: “Learn Spare Tire Sensor ID” under” Miscellaneous Functions” for the “WCM/Wireless Control Module” menu item as appropriate.
If replacing the WCM, the spare tire must be dismounted from its wheel to access and note the spare tire pressure sensor ID. Then follow the programming steps outlined in the diagnostic scan tool for “Learn Spare Tire Sensor ID” under “Miscellaneous Functions” for the “WCM/Wireless Control Module”? menu item as appropriate. In addition, the placard pressure thresholds must be updated in the new WCM. Go to "Update Pressure Thresholds" under "Miscellaneous Functions" for the "WCM Wireless Control Module" and follow the procedure.
- eric def 90 300 dti
- Modérateur
- Messages : 15893
- Date d’inscription : août 2002
- Localisation : palaiseau (91)
- Statut : Hors ligne
re: Indicateur pression
la semaine prochaine je suis en vacances chez moiJeep22 a écrit :Merci
Je vais retourner au garage
Je vais parfois dans ton secteur...
donc dispo pour rendre service
Climatisation et géométrie (30 ans)
Ex-instructeur 4X4 et circuit asphalte (22 ans)
Mon Ex 4x4: Def 110 TD5 SW 2003 à 2016
2016 >>Toyota Hilux Dc 2.5 ..2013
- Jeep22
- Adhérent
- Messages : 5149
- Date d’inscription : avril 2013
- Localisation : En Mer
- Statut : Hors ligne
re: Indicateur pression
Grand Cherokee WK 2 FAP et Willys 1944